Cutting Table & Wall Mounted Dental Sealing Machine
Good cutting dental sealing machine
over view: Table & wall mounted dental sealing machine
Eight advantages of dental sealing machine
1. Wall- mounted & desktop dental sealing machine,save space for dental clinic.
2. Italy Imported Heating bar,never burn the roll.
3. Cut more easy.
4. Hidden blade,safe and reliable.
5. Engergy saving,70% saving more than usual heating bar.
6. Press width is 12mm more reliable.
7. Imported PPS raw material anti- temperature and aging.
8. Energy saving, 70% saving more than usual heating bar.
| Instruments | ||
| State of Led | Indication | Recommended action |
| Steady green light | Apparatus ready for use | Use apparatus |
| Green flashing light | Heating underway | Wait till heating ends |
| Green light flashing with reduced frequency | ECO-mode(energy saving) | Return to normal functioning by operating lever 09 for a moment, otherwise switch apparatus off |
| Steady red light | Sealing over(where bar has been closed for 3 seconds);sealing bar not suffciently hot(where bar have only just been closed) | Re-open sealing bar by raising lever 09 |
| Red flashing light | Sealing bar broken | Subsitute the sealing bar |
| Lever | ||
| Lever 09 allows the sealing bar to close. | ||
| Cutting tool | ||
| The cutting tool 10 allows the packets to be cut once heat- sealed | ||
| ON/ OFF switch | ||
| The ON/ OFF switch 05 allows the apparatus switched ON/ OFF | ||
| Technical specification table | |
| Packet tray 04 | Optional |
| Electrical supply voltage and frequency | Volt230-Hz50/60V-Hz |
| Power | 100W |
| Length of seal | 250mm |
| Width of seal | 10mm |
| Heating | Monolateral |
| Start-up | Manual |
| Weight | 7KG |
| Dimensions： | |
| Width | 445mm |
| Height | 205mm |
| Depth | 325mm |
| Packing dimensions | |
| Width | 515mm |
| Height | 330mm |
| Depth | 390mm |
| INSTRUMENTS | ||
| Led | ||
| State of tod 06 | Indication | Recommended action |
| Steady green light | Apparatus ready for use | Use apparatus |
| Green flashing light | Heating underway | Wait till heating ends |
| Green light flashing with reduced frequency | ECO-mode(energy saving) | Return to normal functioning by operating lever 09 for a moment,otherwise switch apparatus off |
| Steady red light | Sealing over(where bar has been dosed for 3 seconds); sealing bar not suffdently hot(where bar have only just been closed) | Re-open sealing bar by raising lever 09 |
| Red flashing light | Sealing bar broken | Substitute the sealing bar |
| Lever Lever 09 allows the sealing bar to dose. | ||
| Cutting tool The cutting tool 10 allows the packets to be cut once heat-sealed. | ||
| ON/OFF switch | ||
| The ON/OFF switch 05 allows the apparatus switched ON/OFF | ||
Write your message here and send it to us
